The Hobart Handler 210 MVP MIG is the latest addition to a world-class welder manufacturer. Because of the product’s portability and power, it is one of the smoothest releases of the Hobart Handler product line. A great advantage is that it comes with multi-voltage plugs that allow working with either a 115 V or a 230 V outlet.

In creating this welder, Hobart retains their reputation for producing reliable, robust machines that suit a wide range of applications. The Hobart 210 MVP is a flux core MIG welder; it’s the only Hobart welder that can deliver 210A of power in a portable case.

Hobart 210 MVP Review

This Flux-Cored/MIG welding machine is an excellent choice for beginners as it can weld from 24 gauge to 3/8 in. steel in a single pass.

Operating Power

A 210 MVP MIG is a highly versatile welder and is designed to provide the most flexibility, neat, and high-quality weld possible. 

Seven voltage settings make it the perfect tool for professionals. With seven voltage settings, precision welds are possible, ensuring that the finished product is neat and appealing.

Switching Between 115V or 230V Power

It can use it with either 115v or 230v power, and it doesn’t need any special tools to connect to the power outlets. The unit adapts itself according to the power source input to produce top-shelf arc performance.

This rugged MIG welder can also weld aluminium with the optional SpoolRunner 100 gun, which plugs directly into the front of the unit.

The Hobart 210 can supply power outputs ranging from 25A for 230V and 25A to 140A for 115V and a duty cycle ranging from 20% for 90A (1HV) to 30% for 150A (230V).

Weight

The 210 MVP MIG is a pack of 79lbs weight, which is heavy enough. Due to heavy design, moving it from one location to another is quite tricky. A wheeled cart can make it a handy bit. It takes extra cost to buy. Portable cases are included and allow for enhanced mobility but still make the case feel heavy.

It could be a problem for those who are working on specific sites and want to move around. Although its weight is higher than some of its competitors, it is still easy to move around.

Because of its lack of inverter technology, this welder will not run on generators and is therefore not recommended for remote welding sites.

Usability

In terms of comfort, the Hobart Handler 210 MIG is the best welder to use. 

This superior welder is perfect for many monetary work applications, including household, auto body, boat maintenance, and store repair.

It can weld 24 gauge material that is 3/8 inch thick in one pass, and it is fully stocked and ready to use. 

The Hobart can maintain maximum arc performance with its infinite wire feed control system that amazingly controls speeds for less spatter. Unfortunately, the MIG welder is not as light as a piece of equipment. Due to its weight of 79 lb, the MIG welder is a bit heavy—checkout Primeweld CT520D for quality welding.

Flexibility

Handler 210MVP is a massive pack of affordability, quality, and durability; it designs for both experts and novices. This welder’s output range is incredible, from 25A to 210A, making it a worthy welder for both worlds.

At 150A, it offers a maximum duty cycle of 30%, allowing it to weld all types of materials such as aluminium, steel, and stainless steel. It is helpful in various home, auto-body, farm, and DIY applications and minor industrial uses. 

Easy to Use

There is no need to take any trained or experienced welder for using this machine as it has a user-friendly interface. The minimalistic design makes it easy to comprehend the functionality. It takes just a few minutes to set up for a high-quality, robust weld.

Manual Guide

The welder comes with a user manual and a setup chart, so it is easy to use. 

All parts of this machine are clearly explained in the user manual, such as installing, setting, and operating it. It also suggests which setting is best for the specific purpose. 

The setup chart has recommended connections and cords, as well as all the necessary settings.

Also, Check: Miller Diversion 180

Warranty & Cost

Handler 210 MVP has an extensive 5/3/1 warranty that enhanced the superior quality of the machine. This exclusive warranty pack makes this investment-worthy, as it ensures long-term use. The warranty package also offers to repair or service the device in the occurrence of manufacturer’s defects.

The cost is quite reasonable, significantly less than the price of other welders of similar features and capabilities. 

Built-in safety

With its built-in safety settings, this welding device is highly secure.
A good safety measure is to add a snubber to the wiring pigtail, so the electricity does not “thaw” until the trigger is pulled on a MIG welding gun. Hence, even with the plug plugged in, it is still fully secure, as the wire electrically cools the system.
The system protects the wire feed system from overloading with the self-restarting motor feature. The thermal overload feature also protects against short-circuiting and is self-resetting.

Specifications

• Brand name: Hobart
• Model: Handler 210 MVP
• Material: steel
• Colour: black and grey
• Weight: 79 pounds
• Height: 12 and 3/8”
• Length: 19 and ½”
• Width: 10 and 5/8”
• Types of Welding Processes: Both MIG & Flux Core
• Welding Amperage Range 230V: 25 to 210 A
• Welding Amperage Range 115V: 25 to 140 A
• Duty Cycle: 20% at 90 amps and 30% at 150 amps
• Input Voltage: 115/230 V
• Wire Feed Speed Range: 40 to 680 IPM
• Weld Thickness: 24 ga. – 3/8 in.
• Supported welding thickness: 24 ga. – 3/8 in.
• Wire Feed Speed Range: 40-680 IPM
• Number of voltage settings: 7
• Length of power cord: 3 meters
• Wire of 0.8 millimetres for self-shielding
• Manual with instructions
• Warranty: 5/3/1 Industrial Manufacturer Warranty

Check Price

The Handler 210 MVP: What You Should Know

Portable/Lightweight

The Hobart 210 MVP weighs nearly 80 pounds, which makes it extremely difficult to move. The transformer is not as massive as the Hobart Ironman 240 and is therefore more transportable. Hobart 210’s weight makes it unusable as a portable machine by today’s standards.

Similar models are available from other brands with a much lower weight. While the transformer core provides longevity, you may want to consider alternatives if portability is important to you. 

Fixed Voltage Settings

The Hobart 210 offers pretty good adjustability with seven fixed voltage output points. This was highly unusual at that time. Today, it has become obsolete. You can always tune your welds perfectly with many brands that offer infinite voltage output adjustments.

This is something Hobart knows. That’s why they replaced the fixed voltage points in the Ironman 230 model with infinite adjustment points in the Ironman 240. Also, I hope the Hobart 210 will get an upgrade. The model from Hobart lacks this level of arc control until other brands begin to offer it.

Duty Cycle

With a duty cycle of 20 percent at 90A and 230V input, this Hobart is suitable for hobbyists. A welder like this is not cheap, so I’d like to have at least 50% at 150A.

In comparison to the Hobart 210, one of the competing models is cheaper, has a 60% duty cycle at 250A, and does not slack in other areas (we will discuss it later). This level of specifications is no longer acceptable.

Conclusion

Overall, Hobart 210 MVP is a good choice for any welding purpose. Its makes the welding task more manageable, quicker and provide precise welding result. Dual voltage capabilities and great power help it to be more versatile and usable. It controls the output parameters to get a lower spatter rate at the arc for better arc performance and less clean-up.

It offers an impressive 210 amps of power and is one of the most affordable MIG welders available. It provides a higher level of performance and quality, which is an indication of its upgrade version.
The professionals recommend it for any bodywork on a variety of materials.

Robert Mathsin

It’s been years since I got into welding as a side hustle. It’s been so long since Doing All kinds of welds for business and pleasure as this is my hobby. Being in this field I have learned from hands-on-experience also came to know what gears work and what doesn’t. The Tig Welder is my own platform where I use to share my experience.

Choosing the right welder between the two is becomes a tricky task while it comes to choose between Hobart 190 vs 210. Hobart is a well-known brand with a wide range of welders, safety gears, and cutting equipment.
190 is a MIG welder capable enough to deliver up to 190A output while using 230V. The other is 210 MVP; it delivers 115V or 230V input voltage and offers higher 210A output amperage. Both machines are easily transportable, versatile, and affordable, making it challenging to choose the best.

Comparison

Here is a quick view of both products for quick analysis. The following comparison table is based on Metal Thickness Capacity, Power, Duty Cycle, Thermal Overload Protection, Warranty, and Portability.

Check out this comparison table of Hobart 190 and 210;

Hobart 190 vs 210

Hobart 210 machine’s welding range is between 24-gauge (0.6 mm) sheets and 3/8 inch (9.6 mm) on thick metals. Its versatility makes it more suitable for operating with thinner metals.

1- Metal Thickness Capacity

While talking about the maximum welding thickness, the experts always suggest a single pass. These welders can weld thicker to thicker material with various keys. 

When purchasing a welder, a Hobart welder should consider the thickness of the metal and the material. Take note of the minimum and maximum thickness of the metal and material.

Hobart 190 comes within 24-gauge (0.6 mm) and 5/16 inch (8.0 mm) welding range in a single pass while working with steel. Always pay attention while changing to the low setting amperage to avoid holes meanwhile connecting thinner panels. 

Final Thoughts

There is almost no difference between the welding thickness ranges of the two Hobart units, but the 210 provides a better option for welding thin and thick metals at the same time.
Different metals have different values, of course. Stainless Steel and Aluminum user manuals provide the appropriate settings for the materials.

2- Power Capacity

It is essential to buy any machine to identify the input voltage needed to operate that particular machine. Always consider those machines which perfectly compatible with standard household outlets or generators.
Hobart 190 only works on 230v power. it requires a generator if practiced in a house with a 115V power outlet. And keep in mind, it will only work with those generators that produce at least 7,000 Watt. But it has wide amperage output with between 25A and 190A range.
On the other hand, Hobart 120 works on both primary voltage (115v,230v). The amperage output is within 25A and 210A on 230V and within 25A and 140A on 115V.
It is the best option for the thinner materials and provides better performance on lighter materials at 115V. Also works perfectly on thicker materials at 230V for all heavy-duty tasks.

Final Thoughts

The Hobart 210 is thus more versatile since it can be operated at either 115V or 230V, while the model 190 can only work at 230V. Accordingly, it is considered among the best 220V welding machines.

Even though Hobart 190 welding machines can only be powered by 230V, their amperage range still makes them quite versatile. It is able to weld thin as well as thick metals.

3- Duty Cycle

190 welding machine comes with a 30% duty cycle at 130A that indicates that it can perfectly weld for 3 minutes, then it requires 7 minutes for rest. 

But the Hobart 210 MPV has a 30% duty cycle at 150A on 230V and 20% at 90A while plugged on 115V. When it works on 115V, it can weld for two minutes; then, it needs 8 minutes to rest. When it operates on 230V, it can run for 3 minutes; it needs 7 minutes to rest.

Final Thoughts

Hobart 190 and 210 have slight differences in duty cycles based on the comparison. Each unit has a 30% duty cycle and a similarly good performance when operated on 230 volts.

4- Portability

Portability level always depends on weight and size. A lightweight welding machine will be less potent than any heavy device. The 210 model weight is around 79 lb, and the 190 weight is 68 pounds. 

The first one is a bit heavier than to others, but both are portable units. These are easy to move from one place to another. One of this machine’s best features is working from a dynamo with about 7,000 running watts. This machine can operate at job sites without any power.

 5- Thermal Overload Protection

Thermal over protection is one of the essential features in any welding unit. Both Hobart 190 and 210 come with thermal overload protection, automatically turning off the welding device while the device touches its peak duty cycle. It makes the unit cool to get back to work without any damage.

It gets back to the welding when the machine deems itself cool to operate without damaging its internal parts. This device offers seven voltage options, enhanced magnets, and variable wire feed speeds to control output parameters more finely and reduce spattering the best tig welder for the aluminium task.

6- Warranty

Both 190 and 210 units come with a three-year money-back warranty, but the MIG guns covered one year. Material Thickness and Output Amperage is the best part of these models.

Hobart Handler 190 Specifications

• Weight: 89 pounds
• Dimensions: 29.5 x 18.5 x 13.7 inches
• Size: Large 
• 30% duty cycle
• 130 Amps.Open Circuit Voltage:31
• 25 to 190 output amperage
• Welds 24 ga. to 5/16 in. steel
• Material: Steel
• Seven output voltage settings
• 150 Amp Spool Gun
• 10-ft work cable & clamp
• 10-ft power cord
• Extra. 030 contact tips
• 030 flux-cored wire
• 8-inch spool adapter
• Warranty: Standard 5/3/1

Check Price

Hobart Handler 210 Specifications

• Dimensions: 10.62” W x 19.5” L x 12.37” H
• Welder weight: 79 lbs.
• Size: Small
• Installation Method: Gas-welding
• Input Voltage: 110/115/120 V – 220/230/240 V
• Material Thickness: 1/4″ – 3/8
• Power to weld 3/8 in. mild steel
• 10-Feet (3-meter) H100S4-10 gun
• 10-Feet (3-meter) work cable
• Four or 8-Inch spools
• Sample spool of 0.030-Inch (0.8-mm
• Flux-cored wire 0.030-Inch (0.8 mm) contact tips
• 10-Feet (3-meter) power cord
• Warranty: 3-year limited warranty
• 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) MVP plugs

Check Price

Similarities

when the brand is the same, then similarities must exist between them. Let’s move forward.

It is possible to carry both welding devices around to one’s home or a job site. With a bit of effort, either one of the devices can quickly move. Both the machines are suited to auto bodywork, and There’s a handle built-in Hobart 190 that facilitates it even better.

A notable similarity between the two machines is the fact both can run on 230 volts. A contact tip can weld thick metals together by cutting them. There is no possibility of warping or distorted metals. Keep the welding torch correctly held while MIG welding. Also check out Miller 200 vs 215 for more upgraded features like this.

There are seven taps in the voltage control system in both machines. It offers fine-tune welding to matches the expectations of all welders with their infinite loop control and a fast wire speed.

Both the machines’ control panels are the same for the seven-tap system and the spool gun. No extensive manual is needed to understand what the makers placed there.

10 feet is the total length of both the power cord and the cord for the MIG welding gun. Consequently, they both offer us the same degree of manoeuvrability when it comes to manoeuvrability. Among these machines, even the accessories are the same. There is no bid distinction between the two.

Applications

190 Hobart

• Metal art
• Auto body
• DIY hobbyist
• Home maintenance/repair

210 MPV by Hobart

• Metal art
• Boat/marine
• Auto body
• Light fabrication
• Home maintenance/repair

Differences 

After discussing the similarities in detail, Let’s talk about some differences. Still, they are also very different from one another. Firstly, let’s examine them side-by-side.

Duty Cycle

The Duty cycle refers to the maximum time a welding machine is capable of running. It should take a break before it does. While comparing operating time and cool-down periods for these two tools, they are close to each other.

Using 115V, the Hobart 210 MVP operates for two minutes before it rests for eight. In 230V mode, the motor runs for 3 minutes straight before rest for 7 minutes. The duty cycle for 11V is 20%, whereas the duty cycle for 230V is 30%.

Cutting Metals

The 210 MVP can easily cut metals ranging from 24ga to 3/8 in thickness. A metal sheet, a metal bar, or a metal beam would be ideal. Still, Hobart 190 isn’t that far behind. People can cut metal up to a thickness of 5/16 inches with a 24ga gauge.

Secondly, the “Dual-Voltage” concept also plays a part here. The 210 MVP is a versatile unit as there are several voltage settings available. 

Metals with low and high melting points can be cut and welded with this machine. 

They are only able to weld and cut high melting-point metals. Hobart’s MVP for 210 also deserves mention here. Versatility is its most significant advantage.

Power Consumption Stacks up

It’s easy to see which is more versatile here with the naked eye. The Hobart MVP 210 runs on both 115V and 230V, and it can withstand up to seven different voltage levels. There are four different voltage settings at 115V.

The unit allows to accurately calculate how much power is needed to weld different metal components. Because of this, one can cut both thin and thick metals.

Unlike Hobart, the Handler 190 requires 230V to weld. A Hobart 190 generator works well with 7000-watt running generators. Although still only thicker metals can weld with this machine.

FAQ’s

Is it necessary to shield with a gas?

Using Hobart 210 with Flux wire allows to weld metal without using gasoline. Shielding gas is required for the Hobart 190. Shielding gas is required for both machines because it keeps the molten weld pool from contacting airborne oxygen and hydrogen.

Is there a spool gun included with Hobart 190 machines?

Packages vary according to their type. A MIG gun is included in one box, whereas another comes with a MIG gun and a spool gun.

Which safety equipment is most important?

There are several safety precautions to take:

1. Helmet for welding. This type of protective equipment provides radiation and spark protection.
2. Wear a protective jacket. Heavy-duty and medium-duty jackets provide resistance to flames.
3. Put on gloves. Radiation and intense heat can damage the hand, which is protected with gloves.
4. Wear aprons. Their purpose is to give chest and leg protection.
5. Footwear. The extra protection they provide makes the feet feel more secure. Heavy objects will not strike the foot.
6. Wear respiratory protection. The use of respirators prevents your lungs from being inundated with a medley of toxic fumes caused by melting metals.

Are these machines worth investing in?

As we have discussed, the TIG welder can do a lot more than TIG welders, so they might not be the best option if combining welding porn with exotic materials.

A 220V outlet is needed for them; otherwise, they are suitable for almost anyone. The shop does both professional and beginner welding. Because of how many projects they can weld, the average person is not likely to ever use all the welders’ capabilities.

Do they have a warranty?

A 3-year warranty should cover the wire feeding systems and PC-boards on both of these machines. Transformers and stabilizers come with a 5-year warranty. Lastly, welding guns come with a year’s contract. The decision to buy from a particular supplier makes a difference as well. Depending on the reseller rules, the terms might vary.

Conclusions

So, it is hard to decide between Hobart 210 and 190 which of the two would be the best welding device. Both machines perform well as they have the option to perform on both 115V and 230V outlets. It allows performing in various settings at different power levels. So it’s all up to the user to decide according to their preferences.

In the welding industry, Hobart Welders is known for its ability to create quality welding equipment.
Hobart is a wise choice when it comes to purchasing a welding machine because it gives one of the best services available.

Robert Mathsin

It’s been years since I got into welding as a side hustle. It’s been so long since Doing All kinds of welds for business and pleasure as this is my hobby. Being in this field I have learned from hands-on-experience also came to know what gears work and what doesn’t. The Tig Welder is my own platform where I use to share my experience.

Having a Hobart Tig Welder is the Perfect Choice for High-Frequency Tig Welding Machine. There are many ways to weld, but tig welding is one of the best welding types and used mainly by professionals. I need to know which welder comes with a successful TIG welding option. There is also a need to know that between different settings to pick on a TIG welder, it always depends on what project proceeds to be.

Hobart Tig Welder Reviews

Hobart Tig Welder Reviews will help choose the best high-frequency tig welder in this article.

HOBART EZ-TIG 165i – High-Frequency Tig Welder

The HOBART EZ-TIG 165i is an Inverter-Based Welder that performs quick and simply. Instead of various switches and parts requiring constant adjustment, HOBART EZ-TIG 165i offers a single-knob controller design that runs with the classic foot pedal to produce the consistent, clean, and precise weld.
Out of all the High-Frequency Tig Welder, we had the opportunity to share this model, which is the simplest one to start up and use. It provides a complete welding package.

Easy-to-use 230V AC/DC TIG welding package with a single knob, the EZ-TIG 165i is fast and straightforward to set up and operate.

Inverter-Based Design

This welder is very lightweight, which comes with its inverter-based design that provides a compact and valuable welding unit. Two carrying holders are added to the machine’s frame to make it easier and safer to take it from one place to another place. Of course, that is possible just because it weighs, which is only 50 pounds.

Infinite Amperage control

This welder efficiently works up to 160 amps, making it valuable for most light industrial work or home use work. Small and medium projects perform with relative comfort. It comes with a 240-volt plug, 50-amp, and cord. Using it on a household 30-amp circuit will also be acceptable. Ideally, have that circuit in the task area already, but if it doesn’t, then fix it before begin using this welder.

Fan-On-Demand

HOBART EZ-TIG 165i is an air-cooled model, so due to this feature, it can give this welder lot of free time to be utilising it consistently. We checked it didn’t have any issue with it overheating; however, if the weld projects are long and enclosed, it could be a problem for some users.

Check Price

Robert Mathsin

It’s been years since I got into welding as a side hustle. It’s been so long since Doing All kinds of welds for business and pleasure as this is my hobby. Being in this field I have learned from hands-on-experience also came to know what gears work and what doesn’t. The Tig Welder is my own platform where I use to share my experience.