An automobile restoration or welding job does not require a single stitch. Eastwood MP250I is an inverter welder that can handle multiple processes such as TIG, MIG, and Stick welding. Among the smallest and most versatile machines, it is convenient and easy to use.
A self-contained Welder that can operate on 120 or 240 volts is suitable for maintenance, auto-bodywork, household repairs, and light fabrication.
Eastwood MP250I Review
One of the best multipurpose welders out there, Eastwood MP250I is designed more for fixed-position operation. As far as its welding capabilities go, this device can weld up to 5/8″ thick steel plates as well as thin sheet metal.
The inverter is integrated with modern IGBT technology and operates on 120/240 volts. One of the most impressive features of the MP250I is its ability to continuously weld for six minutes then rest. For this feature, Amico CTS 200 is also a good option.
Great Duty Cycle
It’s a good choice with a duty cycle of 60% at 250 amps and 100% at 194 amps. So the work product is very resource-efficient. A powerful welder like this can handle any welding task.
This model can weld continuously for 6 minutes without letting it cool because of its duty cycle of 60% at 250 amps. With a power range of 15 to 250A, the welder can use it at home or the shop.
Easy to Operate
There are two gears on the drive motor which govern the wire feeding speed, and this ensures that the wire is fed precisely.
With its simple interface and adjustable controls, the machine is easy to operate, maintain, and install. Due to its inductance feature, this product also allows for precise arc control.
It is possible to do the welding at home with wide enough amperages. An elegant interface makes the machine easy to use. A knob setups voltages and amperes. Even welders without enough knowledge can use this equipment since the knobs are adjustable. Get more specifications like this from Lotos LTP5000D
The machine comes with a 3-year warranty like most welders from the brand. If the machine malfunctions due to a defect in material or quality, Eastwood will repair or replace it at no charge.
But If the device has been improperly installed, used, or cared for, the warranty may no longer be valid.
It is effortless for new and experienced welders alike to assemble this welder. It begins welding immediately after setting up the machine because it comes with all its needs. But, first, all it needs to plug in the details at their designated places.
An informative installation manual is also included as part of the unit.
- Dimensions: 36″x21″x31″ in
- Weight: 150 pounds
- Volts: 120, 240 volts
- Weld up to 1/2″
- Power: IGBT Inverter Based
- Wire Feed Speed: 78-629 (in/min)
- Wire sizes: 0.030 – 0.045
- Welding type: MIG, TIG or Stick
- Weldable Metals: Steel, and Aluminum
- Warranty: 3-year
Power and Speed
- Post Flow Time (seconds): 1.0+/-0.05
- Power Factor: 0.73
- Compatible Wire sizes: .030-.045
- Wire Feed Speed (in/min): 78-629
- Power Voltage (V): 1 phase 240V+/-10%, 1 phase 120V+/-10%
- Power Cord Receptacle Plug: NEMA 6-50R
- Frequency (Hz): 50/60
- No Load Voltage (V): 61
- Efficiency (%): 80
- Output Voltage (V) 120V: MIG = 16.5-21, TIG = 10.6-15.6, ARC = 21-25.6
- Output Voltage (V) 240V: MIG = 16.5-26.5, TIG = 10.6-20, ARC = 21-30
- Duty Cycle: 60% @ 250 aMPS
- Rated Input Current (Amps) 240V: MIG = 47.3, TIG = 35.7, ARC = 53.5
- Output Current Adjustment (Amps) 240V: MIG = 50-250, TIG = 15-250, ARC = 25-250
- Output Current Adjustment (Amps) 120V: MIG = 50-140, TIG = 15-140, ARC = 25-140
How many amps does the 240volt circuit require?
To operate this unit, a 240-volt 50-amp circuit is required.
Is it possible to use a foot pedal for TIG on the MP250I?
It’s not possible. The TIG welder is only a scratch-start model, so foot control is not possible.
Is this machine capable of welding aluminium?
A welder can weld aluminium and a wide variety of metals. Unfortunately, the machine does not come with a spool gun, so there is a need to purchase one to weld aluminium.
After reading all the Eastwood MP250I reviews and considering all the specs and features of the welder, it is safe to say it’s the best welding machine on the market.
The Eastwood MP 250I is a multipurpose welder that stands out from the competition. It is convenient, easily assembled, and easy to set up. Plus, it welds excellent, comes with an easy-to-use warranty, and is very affordable. This is a high-quality, low-cost welder that can do it all; this is an excellent choice for professionals, hobbyists, or DIYers.
The cart allows it to move quickly, despite its weight. It differs from the others in this price section in its versatility to different weld kinds of materials such as steel and aluminium.
It’s been years since I got into welding as a side hustle. It’s been so long since Doing All kinds of welds for business and pleasure as this is my hobby. Being in this field I have learned from hands-on-experience also came to know what gears work and what doesn’t. The Tig Welder is my own platform where I use to share my experience.